Aquatec Auto Flush Timers
Aquatec’s AFR Series Automatic Membrane Flush Flow Restrictor Timers are engineered to maximize system efficiency and prolong membrane life. These components utilize a normally closed solenoid valve which automatically “power flushes” the membrane upon start-up and then subsequently for 15-20 seconds every hour.
This turbulent water action removes organic and inorganic contaminants from the membrane surface. Any standing, idle water in the membrane module is automatically purged to the drain. Virtually all system manufacturers recommend that their membranes be flushed regularly to insure proper performance and extended membrane life.
The AFR Series Auto Flush Flow Restrictors perform this process seamlessly and automatically. The AFR Series also include a modular connector for plug-and-play integration with Aquatec’s other system components.
Benefits of Aquatec Auto Flush Timer Flow Restrictors
- Improves TDS rejection rate
- Extends membrane life
- Integrated flow restrictor
- Hermetically sealed circuitry
Aquatec Auto Flush Timer Ordering Information
|
Aquatec Model No. |
With Flow Restrictor |
For Membrane Flow (GPD) |
In/Out Connections |
|
AFR603 |
300 M/L per Min. |
25 |
¼” w/ Compression Nut |
|
AFR604 |
400 M/L per Min. |
35 |
¼” w/ Compression Nut |
|
AFR605 |
500 M/L per Min. |
50 |
¼” w/ Compression Nut |
|
AFR606 |
600 M/L per Min. |
50 |
¼” w/ Compression Nut |
|
AFR607 |
700 M/L per Min. |
75 |
¼” w/ Compression Nut |
|
AFR608 |
800 M/L per Min. |
75 |
¼” w/ Compression Nut |
Features of Aquatec Auto Flush Timer Flow Restrictors
- Wetted Materials: Polypropylene, EPDM, Stainless Steel
- Power Requirements: 24 VAC/24 VDC, 120 mA - flushing, 40mA – off cycle
- Inlet Pressure/Orifice: Maximum 100 psi, .093” diameter orifice
- Flow Restrictor Orifice: 300mL – 700mL orifices available
- Standard Fittings: Jaco ¼” Male Threaded Fitting with Compression Nut
- Electrical Connection: AMP Mate-N-Lok
Applications for Aquatec Auto Flush Timer Flow Restrictors
|
|