Skip to content
Support
Technical Site
Employment

Fleck 9500

Request a Quote Ask a Question

Fleck Control Valves for Softeners and Media Filters Fleck 9500 & 9500SXT Series 1.5” Commercial Twin Alternating Softener Control Valves

Fleck’s 9500 valve controls the regeneration of both tanks in a twin alternating softener and is ideal for twin commercial water softeners up to 24” diameter tank size.  The 9500 mechanical design offers rugged construction and simple operation.

Fleck Control Valves automatically control the backwash and regeneration cycles for water softeners to keep your water softener working at optimal performance all the time. Twin alternating softeners are metered for on-demand regeneration when a pre-set volume of water has been used. Ideal for situations where uninterrupted flow of soft water is a must twin softeners consist of two resin tanks. One resin tank is always in service, while the other tank is in standby. When the meter determines that the resin is near its capacity, it will switch the tank in standby to be in service, and the tank containing the exhausted resin switches into regeneration, and then into standby.

Benefits of Fleck 9500 Twin Alternating Water Softener Valves

  • Uninterrupted Flow of Soft Water
  • Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
  • Regenerates with soft water and keeps system clean for optimum operating efficiency and minimum maintenance
  • Solid lead-free brass body for long life and durability
  • Fully automatic operation

Fleck 9500 Twin Alternating Water Softener Valve Product Details

Flow Rates: (50 PSI Inlet)

  • Continuous (15 psi drop):  38 gpm
  • Peak (25 psi drop): 49 gpm
  • Max Backwash (25 psi drop): 16 gpm
  • Valve Material:  Lead-Free Brass
  • 2½” – 8 NPSM Mounting Base
  • 1½” NPTF In/Out Connectors
  • 1700 Brine System ½” Housing
  • No Hard Water Bypass

AMI Model No.

Meter

Meter Capacity Range

YVS95ECXAT15

Standard Range 1.5”

625-10,625 Gal.

YVS95FCXAT15

Extended Range 1.5”

3,125-53,125 Gal.
  • Valves shown are 110v/60Hz.  Other voltages available.
  • Valves shown with 15 gpm backwash flow (indicated by last 2 digits).   Other backwash flows are available (max. 16 gpm).

 

Fleck 9500 Twin Alternating Valve

Fleck 9500 Twin Alternating Valve

Fleck 9500 Twin Alternating Valve Back

Fleck 9500 Twin Alternating Valve Back

Fleck 9500 Twin Alternating Water Softener Valve Features

  • Fully adjustable 5-cycle control delivers controlled upflow backwash, downflow brining, slow rinse, rapid rinse, timed brine refill and downflow service
  • Easily-adjustable, 5-cycle, downflow-brining control
  • Rugged, long-life construction features a lead-free brass valve body
  • Uses conditioned water for regeneration
  • TESTED AND CERTIFIED By the WQA To NSF/ANSI SDT. 61 Section 8 Material Safety Only and ANNEX "G"

Applications for Fleck 9500 Twin Alternating Water Softener Valves

  • Twin Alternating Water Softeners up to 24 Diameter
  • Point of Entry (POE) Water Softening
  • Commercial
  • Hotels, Resorts, and Spas
  • Pretreatment to RO and other Water Treatment Systems
  • Pretreatment to Ion Exchange Systems
  • Ice Makers
  • Labs

Optional Equipment for Fleck 9500 Twin Alternating Water Softener Valves

Fleck controls are available with the following options upon customer request:

  • Bypass Valve
  • Hot Water
  • Auxiliary Switches
  • 3200 Mechanical Timer (SXT or XT Electronic Timer)
  • Cover with Window for Electronic Timer

 

Related Media Filtration Products

Literature for Fleck 9500 Twin Alternating Water Softener Valves