Brackish Low Energy

Request a Quote Ask a Question

AMI Low Energy Brackish Water RO Membrane elements are specially designed to run at 150 psi while producing the same product flow. By using these instead of standard elements in your commercial reverse osmosis system, you can significantly reduce your operating costs. These elements are wrapped in a hard shell of FRP for added strength and to withstand higher pressure drops.

AMI reverse osmosis membrane elements are among the finest in the industry. With hundreds of thousands of RO membranes in operation world-wide, AMI BWRO Membranes are Made in the USA in our ISO 9001:2015 Certified Facilities. Each RO membrane element meets or exceeds our strict performance requirements before shipping. For over 40 years we have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in reverse osmosis water treatment systems.

Reduce operating costs and wear and tear on your system by running your system at a lower pressure.
Hard fiberglass exterior provides added strength and withstands higher pressure drops than tape-wrapped elements.
Reverse osmosis membranes remove up to 99% of total dissolved solids.
RO membranes remove dissolved impurities such as chloride, lead, chromate, fluoride, bacteria and others.

Model No.	Permeate Flow Rate		Size (Dia.”× Length”)	Single Element Recovery (%)	Minimum Salt Rejection (%)	Stabilized Salt Rejection (%)
Model No.	gpd	lpd	Size (Dia.”× Length”)	Single Element Recovery (%)	Minimum Salt Rejection (%)	Stabilized Salt Rejection (%)
M-B2514ALE	264	999	2.5 × 14	5	98	99
M-B2521ALE	450	1,703	2.5 × 21	8	98	99
M-B2540ALE	1,000	3,785	2.5 × 40	15	98	99
M-B4014ALE	610	2,309	4.0 × 14	5	98	99
M-B4021ALE	1,148	4,345	4.0 × 21	8	98	99
M-B4040ALE	2,900	10,976	4.0 × 40	15	98	99

Note: Performance specifications based on 2,000 mg/l sodium chloride, 150 psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.

Caution: Do not run these membranes at a pressure that will produce more than their rated product flow rate. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.

Individual Low Energy Brackish Water RO Membrane Element Photos:

M-B2514ALE

M-B2521ALE

M-B2540ALE

M-B4014ALE

M-B4021ALE

M-B4040ALE

Low Energy Membrane Sheet Material for Lower Power Consumption and Operating Costs
Hard Fiberglass Exterior for Added Strength and Durability
High Rejection & Flow Rate
Made in the USA
Manufactured in our ISO 9001:2015 Certified Facilities
100% Performance and Quality Tested
Backed by our Experienced Technical Support Staff
High Quality for Consistent and Reliable Performance
Uses the most advanced membrane film technology and manufacturing processes
Standard dimensions to fit in commonly available housings

USA ISO Performance Quality Water Quality