Heat Sanitizable
AMI heat sanitizable reverse osmosis membrane elements are specially designed to withstand hot water sanitization, eliminating the need for chemical sanitizers. AMI heat-santizable HSRO membrane elements have an FRP external shell, fit industry-standard size housings, and consistently deliver high productivity and rejection. AMI also offers preconditioned heat sanitizable HSROP membrane elements.
AMI reverse osmosis membrane elements are among the finest in the industry. With hundreds of thousands of RO membranes in operation world-wide, AMI HSRO Membranes are Made in the USA in our ISO 9001:2015 Certified Facilities. Each reverse osmosis membrane element meets or exceeds our strict performance requirements before shipping. For over 40 years we have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in reverse osmosis water treatment systems.
Benefits of AMI Heat Sanitizable RO Membranes
- Designed to withstand hot water sanitization, eliminating the need for chemical sanitizers.
- Hard fiberglass exterior provides added strength and withstands higher pressure drops.
- Designed to fit industry-standard size membrane housings
- Reverse osmosis membranes remove up to 99% of total dissolved solids.
- RO membranes remove dissolved impurities such as chloride, lead, chromate, fluoride, bacteria and others.
Operating and Performance Data for AMI HSRO Membranes
|
Model No. |
Permeate Flow Rate |
Size |
Feed Pressure
|
Single Element Recovery |
Stabilized Salt Rejection |
|
|
gpd |
lpd |
|||||
|
M-B2514HS |
200 |
757 |
2.5 x 14 |
150 psi |
5% |
99.5% |
|
M-B2521HS |
325 |
1230 |
2.5 x 21 |
150 psi |
8% |
99.5% |
|
M-B2540HS |
1000 |
3785 |
2.5 x 40 |
150 psi |
15% |
99.5% |
|
M-B4021HS |
900 |
3407 |
4.0 x 21 |
150 psi |
8% |
99.5% |
|
M-B4040HS |
1900 |
7192 |
4.0 x 40 |
150 psi |
15% |
99.5% |
Note: Performance specifications based on 2,000 mg/l sodium chloride, 150 psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.
Preconditioned Heat Sanitizable RO Membrane Elements HSROP
AMI Preconditioned heat sanitizable HSROP membrane elements are preconditioned with hot water before being preserved and packaged. HSROP elements are shipped wet.
|
Model No. |
Permeate Flow Rate |
Size |
Feed Pressure
|
Single Element Recovery |
Stabilized Salt Rejection |
|
|
gpd |
lpd |
|||||
|
M-B2514HSP |
200 |
757 |
2.5 x 14 |
150 psi |
5% |
99.5% |
|
M-B2521HSP |
325 |
1230 |
2.5 x 21 |
150 psi |
8% |
99.5% |
|
M-B2540HSP |
1000 |
3785 |
2.5 x 40 |
150 psi |
15% |
99.5% |
|
M-B4021HSP |
900 |
3407 |
4.0 x 21 |
150 psi |
8% |
99.5% |
|
M-B4040HSP |
1900 |
7192 |
4.0 x 40 |
150 psi |
15% |
99.5% |
Note: Performance specifications based on 2,000 mg/l sodium chloride, 150 psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.
AMI Heat Sanitizable Reverse Osmosis Membrane Features
- Constructed of materials suitable for hot water sanitization up to 185° F (85°C)
- Hard Fiberglass Exterior for Added Strength and Durability
- High Rejection & Flow Rate
- Made in the USA
- Manufactured in our ISO 9001:2015 Certified Facilities
- 100% Performance and Quality Tested
- Backed by our Experienced Technical Support Staff
- High Quality for Consistent and Reliable Performance
- Uses the most advanced membrane film technology and manufacturing processes
- Standard dimensions to fit in commonly available housings
