P Series
Pentair® Pentek® P Series sediment filter cartridges are manufactured from pure 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surfaces.
Pentek Ametek P Series cartridges are designed for purity. They will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
The coreless strength of the cartridges is achieved by sintering the many fibers into a solid matrix.
Pentek Ametek P Series cartridges are available in a wide array of sizes and micron ratings to accommodate all of your filtration needs.
Benefits of Pentek Spun Polypropylene P Series Sediment Filters
- Protect downstream equipment and appliances
- Removes dirt, rust, sand, grit, and other suspended solids from water
- Graded density from outer to inner surfaces increases dirt holding capacity and prevents clogging to extend the filter life
- Designed for Purity: Will not impart taste, odor or color to water being filtered
- Polypropylene construction provides superior chemical resistance and is not prone to bacterial attack
- Nominal 1, 5, 10, 25, 50 micron rating
P Series Spun-Bonded Polypropylene Cartridges Ordering Details
|
Model No. |
Name |
Micron Rating |
Max. Dimensions |
For Housing |
Initial ΔP @ Flow Rate |
Case Qty. |
|
|
Dia. |
Length |
||||||
|
155030-43 |
P5-478 |
5 µ |
2.38” |
4.88” |
5” Standard |
0.3 psi @ 2 gpm |
24 |
|
155225-43 |
P1 |
1 µ |
2.38” |
9.75” |
10” Standard |
0.6 psi @ 5 gpm |
24 |
|
155014-43 |
P5 |
5 µ |
2.38” |
9.75” |
10” Standard |
0.2 psi @ 5 gpm |
24 |
|
155015-43 |
P25 |
25 µ |
2.38” |
9.75” |
10” Standard |
0.2 psi @ 5 gpm |
24 |
|
155304-43 |
P1-20 |
1 µ |
2.38” |
20.0” |
20” Standard |
0.6psi @ 10gpm |
20 |
|
155016-43 |
P5-20 |
5µ |
2.38” |
20.0” |
20” Standard |
0.6psi @ 10gpm |
20 |
|
155226-43 |
P25-20 |
25µ |
2.38” |
20.0” |
20” Standard |
0.2psi @ 10gpm |
20 |
|
155228-43 |
P5-30 |
5 µ |
2.38” |
30.0” |
30” Standard |
0.2psi @ 10gpm |
20 |
|
155224-43 |
P25-30 |
25 µ |
2.38” |
30.0” |
30” Standard |
0.2psi @ 10gpm |
20 |
Pentek Spun Polypropylene P Series Sediment Filter Features
- Manufactured from pure 100% polypropylene.
- Designed for purity and chemical compatibility.
- Spun fibers form a true gradient density from outer to inner surfaces.
- Filter Media: Polypropylene Fibers
- Temperature Rating: 40-145°F (4.4-62.8°C)
- Lengths: 4.88”, 10", 20", 30"
- Pentek P1, P5, P1-20, and P5-20 are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only. (Other models on this page are not currently certified)
Applications for Pentek Spun Polypropylene P Series Sediment Filters
|
|