Tap Water Extra Low Energy

Request a Quote Ask a Question

AMI Extra-Low Energy RO Membrane elements are specially designed to run at 100 psi while producing similar product flow as standard models. By using these instead of standard elements in your commercial reverse osmosis system, you can significantly reduce your operating costs. Tape Wrapped

AMI reverse osmosis membrane elements are among the finest in the industry. With hundreds of thousands of RO membranes in operation world-wide, AMI RO Membranes are Made in the USA in our ISO 9001:2015 Certified Facilities. Each reverse osmosis membrane element meets or exceeds our strict performance requirements before shipping. For the past 30 years we have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in RO water treatment systems.

Reduce operating costs and wear and tear on your system by running your system at a lower pressure.
Reverse osmosis membranes remove up to 99% of total dissolved solids.
RO membranes remove dissolved impurities such as chloride, lead, chromate, fluoride, bacteria and others.

Model No.	Permeate Flow Rate		Size (Dia.”× Length”)	Single Element Recovery (%)	*Minimum Salt Rejection (%)^†**	*Stabilized Salt Rejection (%)^†**
Model No.	gpd	lpd	Size (Dia.”× Length”)	Single Element Recovery (%)	*Minimum Salt Rejection (%)^†**	*Stabilized Salt Rejection (%)^†**
M-T2026AXLE	240	908	2.0 × 26	10	98	99
M-T2514AXLE	190	719	2.5 × 14	5	98	99
M-T2521AXLE	365	1382	2.5 × 21	8	98	99
M-T2540AXLE	850	3217	2.5 × 40	15	98	99
M-T4014AXLE	540	2044	4.0 × 14	5	98	99
M-T4021AXLE	1025	3880	4.0 × 21	8	98	99
M-T4040AXLE	2860	10825	4.0 × 40	15	98	99

Note: Performance specifications based on 500 mg/l sodium chloride, 100psi (0.7 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.

Caution: Do not run these membranes at a pressure that will produce more than their rated product flow rate. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.

Individual XLE RO Membrane Element Photos:

M-T2013AXLE

M-T2026AXLE

M-T2514AXLE

M-T2521AXLE

M-T2540AXLE

M-T4014AXLE

M-T4021AXLE

M-T4040AXLE

Extra-Low Energy Membrane Sheet Material for Lower Power Consumption and Operating Costs
High Rejection & Flow Rate
Made in the USA
Manufactured in our ISO 9001:2015 Certified Facilities
100% Performance and Quality Tested
Backed by our Experienced Technical Support Staff
High Quality for Consistent and Reliable Performance
Uses the most advanced membrane film technology and manufacturing processes
Standard dimensions to fit in commonly available housings

USA ISO Performance Quality Water Quality