Tap Water Low Energy

Request a Quote Ask a Question

AMI Low Energy RO Membrane elements are specially designed to run at 150 psi while producing the same product flow as standard elements. By using these elements in your commercial reverse osmosis system, you can significantly reduce your operating costs. For tap water applications.

AMI reverse osmosis membrane elements are among the finest in the industry. With hundreds of thousands of RO membranes in operation world-wide, AMI RO Membranes are Made in the USA in our ISO 9001:2015 Certified Facilities. Each reverse osmosis membrane element meets or exceeds our strict performance requirements before shipping. For the past 30 years we have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in RO water treatment systems.

Reduce operating costs and wear and tear on your system by running your system at a lower pressure.
Reverse osmosis membranes remove up to 99% of total dissolved solids.
RO membranes remove dissolved impurities such as chloride, lead, chromate, fluoride, bacteria and others.

Model No.	Permeate Flow Rate		Size (Dia.”× Length”)	Single Element Recovery (%)	Stabilized Salt Rejection (%)
Model No.	gpd	lpd	Size (Dia.”× Length”)	Single Element Recovery (%)	Stabilized Salt Rejection (%)
M-T2026ALE	450	1703	2.0 × 26	10	99
M-T2514ALE	264	999	2.5 × 14	5	99
M-T2521ALE	450	1703	2.5 × 21	8	99
M-T2540ALE	1000	3785	2.5 × 40	15	99
M-T4014ALE	610	2309	4.0 × 14	5	99
M-T4021ALE	1148	4345	4.0 × 21	8	99
M-T4040ALE	2900	10976	4.0 × 40	15	99

Note: Performance specifications based on 2,000 mg/l sodium chloride, 150psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.

Caution: Do not run these membranes at a pressure that will produce more than their rated product flow rate. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.

Individual Low Energy RO Membrane Element Photos:

M-T2013ALE

M-T2026ALE

M-T2514ALE

M-T2521ALE

M-T2540ALE

M-T4014ALE

M-T4021ALE

M-T4040ALE

Low Energy Membrane Sheet Material for Lower Power Consumption and Operating Costs
High Rejection & Flow Rate
Made in the USA
Manufactured in our ISO 9001:2015 Certified Facilities
100% Performance and Quality Tested
Backed by our Experienced Technical Support Staff
High Quality for Consistent and Reliable Performance
Uses the most advanced membrane film technology and manufacturing processes
Standard dimensions to fit in commonly available housings

USA ISO Performance Quality Water Quality